•Independent, integral heat controller, positioned on the top of the wrist for easy operation when riding.
•NEW Scaphoid guard, for maximum protection to the palm.
•Visor Wipe positioned on the left index finger.
•3M Thinsulate™ and Hipora™ waterproof membrane for premium water and wind protection.
•Conforms to the latest European PPE Directive EN 13594:2015, so you can be confident in their protective qualities.
•Please note: All personal protective equipment in Europe must clearly show whether they comply with the current PPE regulation via a label. A label showing ‘CE approval’ does not mean they are certified.
•Features a glove battery pocket built into the glove cuff. This provides the feature of being able to power the gloves via the optional portable glove batteries (one in each glove cuff battery pocket). See Keis Lithium Batteries for details.
•Current Draw 1.6A.
•Typical Power 19.2W.
•Available in sizes 5 (3XS), 6 (2XS), 7 (XS), 8 (S), 9 (M), 10 (L), 11 (XL), 12 (2XL), 13 (3XL).
•Features the ‘Male Power Plug’ to connect to your chosen power source.
•Using the latest technology in heat generation, the G301 gloves can be powered from a 12V vehicle battery (cables supplied), an optional Keis Battery Pack, or the specially designed Glove Batteries that fit into the cuff pocket of each glove.
Included
•G301 Premium Heated 3-Finger Gloves
•Glove Y Lead
•Motorcycle Connection Lead
•Instructions
Notes
•All Keis Gloves come complete with everything required to power them independently. However, the Heated Vests and Bodywarmers incorporate integrated power sockets specifically to power Keis Heated Gloves using optional connection leads. The Keis Heated Jacket will also power these gloves via a lead in the sleeves.
•The G301 Premium Heated Gloves come with the vehicle supply lead to power from a 12V motorcycle battery but can also be powered using optional Keis Heated Gloves Batteries so you can use the gloves away from a motorcycle in other outdoor activities. This is an optional extra.
•For your safety try and avoid illegal motorcycle gloves. All UK legal motorcycle gloves must be clearly marked as certified EU PPE compliment, and provide an EU PPE Declaration of Conformity.
Cleaning Guidelines
•The recommended method for cleaning both leather and fabric outer gloves is to wipe the outside of the gloves with a cloth moistened with a solution prepared from S100 Technical Fabric and Leather Wash.
•Repeat, rinsing and wringing out the cloth regularly in clean solution until the gloves appear clean.
•Wipe over with a cloth moistened in plain water and allow to dry thoroughly at room temperature.
•Finally apply S100 reproofing Spray for Fabric and Leather. We do not recommend immersion in water or washing in a washing machine.
Read Before Using Heated Clothing
•Prolonged close contact with the body of the heating system can cause burns. NEVER wear directly against the skin. This does not apply to heated gloves.
•ALWAYS wear a base layer between the product and the skin.
•DO NOT wear tight over-garments.
•DO NOT use for prolonged periods particularly at high power and/or at temperatures above 5°C.
•ALWAYS use the lowest possible setting for comfort.
•DO NOT use when wet. This includes excessive sweat.
•DISCONTINUE USE IMMEDIATELY at any sense of discomfort.
•Check connection leads regularly for signs of fatigue.
•If you power this garment using any of the optional Portable Battery Packs, always remove li-ion battery packs from garments when not in use.
•Not recommended for children, pregnant women or those with a heart condition.
•More information can be found in the supplied instruction manual.
•DO NOT allow the garment to remain in precisely the same position on any part of the body (particularly hands) for periods of more than 20 minutes. Always ensure that there is sufficient movement to reposition the heating panels on the body to some extent to help avoid localised overheating. Blistering of the skin can occur if this warning is not heeded.


















Reviews
There are no reviews yet.